LIFE VISIO Photocell Sensor UAE

Original LIFE VISIO 20M Outdoor Safety Photocells for Automatic Gates

The LIFE VISIO Photocell Sensor UAE is an original pair of synchronized outdoor safety photocells designed for automatic gate, garage door, shutter and parking barrier systems. The VISIO photocells detect obstacles passing through the infrared safety beam and provide a signal to the connected automation control system.

With a maximum operating range of 20 metres, 12–24V DC power supply and an IP54 protection rating, LIFE VISIO provides a professional safety solution for residential, commercial and industrial automatic entrance systems.

We supply original LIFE VISIO photocell sensors in Dubai, Sharjah, Abu Dhabi, Ajman and throughout the UAE, with professional installation, replacement and technical support available for compatible automatic gate systems.

LIFE VISIO Photocell Key Features

• Brand: LIFE
• Model: VISIO
• Product Type: Synchronized Outdoor Safety Photocells
• Maximum Range: 20 Metres
• Power Supply: 12–24V DC
• Current Consumption Tx/Rx: 25 / 35 mA
• Protection Rating: IP54
• Receiver Contact Type: NC + NO
• Maximum Receiver Contact Rating: 1A / 24V DC
• Operating Temperature: -20°C to +55°C
• Synchronized transmitter and receiver photocells
• Designed for outdoor gate automation
• Obstacle detection for automatic entrances
• Suitable for residential and commercial applications
• Easy integration with compatible automation control boards
• Original LIFE Italy Automation Product

LIFE VISIO Technical Specifications

How LIFE VISIO Gate Photocells Work

The LIFE VISIO safety photocell system consists of a transmitter and receiver installed facing each other across the gate or vehicle entrance. The transmitter creates an infrared safety beam that is continuously monitored by the receiver.

If a person, vehicle or other obstacle interrupts the beam while the automatic gate or barrier is moving, the photocell sends a signal to the connected control board. The exact response depends on the automation system programming and may include stopping, preventing closing or reversing movement.

20 Metre Automatic Gate Safety Sensor

The LIFE VISIO photocells provide a manufacturer-specified maximum operating range of 20 metres, making them suitable for many residential, commercial and industrial gate entrances.

Correct alignment between the transmitter and receiver is important for reliable photocell operation. Actual performance can also depend on installation position, wiring and environmental conditions.

12V / 24V DC Gate Photocell

The LIFE VISIO photocell operates from a 12–24V DC power supply, allowing integration with compatible automatic gate and barrier control systems.

The transmitter consumes approximately 25 mA, while the receiver consumes approximately 35 mA according to LIFE's technical specifications.

NC + NO Relay Contacts

The VISIO receiver provides both Normally Closed (NC) and Normally Open (NO) relay contacts, giving installers flexibility when connecting the photocell to compatible gate automation control boards.

The maximum receiver contact capacity is specified at 1A / 24V DC. The correct contact should be selected according to the safety input requirements of the connected controller.

IP54 Outdoor Photocell Protection

The LIFE VISIO has an IP54 protection rating, making it suitable for outdoor automatic gate installations when correctly mounted and wired.

LIFE specifies an operating temperature range of -20°C to +55°C, supporting use in a wide range of residential and commercial automation environments.

LIFE VISIO for Sliding Gate Motors

The LIFE VISIO photocell sensor can be used with compatible automatic sliding gate systems to monitor the gate opening and help prevent unsafe closing when an obstacle is detected.

It is suitable for many LIFE ACER and other compatible sliding gate installations where the control board provides the required photocell safety input.

LIFE VISIO for Swing Gate Motors

LIFE VISIO can also be used with compatible automatic swing gate motors, including residential villa and commercial double-gate systems.

Correct photocell placement is important so that vehicles and pedestrians passing through the swing gate entrance are properly detected.

LIFE VISIO for Parking Barriers

The LIFE VISIO photocell system is suitable for compatible automatic parking gate barriers. The safety beam can monitor the vehicle lane and provide a safety signal to the barrier controller when a vehicle or obstacle is present.

This helps support safer barrier closing in residential, commercial and controlled-access parking applications.

LIFE VISIO for Garage Door Openers

The VISIO photocells can also be integrated with compatible garage door automation systems where an appropriate safety photocell input is provided.

The system can help detect vehicles or objects within the safety beam before or during automatic door movement.

LIFE VISIO for Rolling Shutters & Automatic Doors

LIFE officially specifies VISIO/VIRE photocells for detecting obstacles during the movement of doors, gates, shutters and barriers. This allows the VISIO safety sensor to be used in a broad range of compatible automation applications.

Compatible LIFE Automation Systems

LIFE VISIO photocells can be integrated with compatible LIFE automation control systems, including suitable:

• LIFE ACER Sliding Gate Motors
• LIFE DEUS Sliding Gate Motors
• LIFE OPTIMO Swing Gate Motors
• LIFE OP3 Swing Gate Motors
• LIFE OP5 Swing Gate Motors
• LIFE PROBO Garage Door Openers
• LIFE SUPRA Parking Barriers
• LIFE Gate Control Boards

Important: Always confirm the control-board wiring and photocell input requirements before installation.

Why Use Safety Photocells on an Automatic Gate?

Safety photocells provide an additional detection system for automatic gates and barriers. When the infrared beam is interrupted, the automation controller can respond according to its programmed safety logic.

Photocells are particularly useful at vehicle entrances where the automatic gate or barrier must detect traffic passing through the movement area.

When Should LIFE VISIO Photocells Be Replaced?

A LIFE VISIO photocell may require inspection or replacement if the automatic gate develops symptoms such as:

• Gate will open but does not close
• Gate reverses unexpectedly during closing
• Photocell LED not responding correctly
• Safety input remains permanently active
• Transmitter and receiver cannot align
• Physical damage to photocell housing
• Water or moisture damage
• Damaged wiring or terminals

These symptoms can also be caused by wiring, alignment, power-supply or control-board problems, so professional diagnosis is recommended before replacing the photocells.

LIFE VISIO Photocell Installation

Correct installation requires the transmitter and receiver to be mounted opposite each other with proper alignment across the entrance.

The photocells must then be wired to the appropriate power and safety terminals of the automation control board. Exact wiring varies according to the gate motor or barrier controller being used.

LIFE VISIO Photocell Sensor in Dubai

We supply and install the LIFE VISIO Photocell Sensor in Dubai for sliding gates, swing gates, parking barriers, garage doors and compatible automatic entrance systems.

Professional wiring, replacement, alignment and technical support are available according to the automation system.

LIFE VISIO Photocell Sensor in Sharjah

Customers searching for a LIFE gate photocell sensor in Sharjah can order original VISIO safety photocells for compatible residential and commercial automatic gate systems.

Supply, installation and technical support are available throughout Sharjah.

LIFE Photocell Sensor Supply Across UAE

We supply original LIFE VISIO Photocell Sensors across the UAE, including Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Whether you require a gate photocell in Dubai, automatic gate safety sensor in Sharjah, parking barrier photocell in Abu Dhabi or a LIFE photocell anywhere in UAE, original VISIO sensors and technical support are available.

LIFE VISIO Frequently Asked Questions

What is LIFE VISIO?

LIFE VISIO is a pair of synchronized outdoor safety photocells designed to detect obstacles during automatic gate, door, shutter and barrier movement.

What is the maximum range of LIFE VISIO?

The manufacturer specifies a maximum operating range of 20 metres.

What voltage does LIFE VISIO use?

LIFE VISIO operates on a 12–24V DC power supply.

What is the IP rating of LIFE VISIO?

The LIFE VISIO photocell has an IP54 protection rating.

Does LIFE VISIO have NC and NO contacts?

Yes. The receiver provides both Normally Closed (NC) and Normally Open (NO) relay contacts.

What is the maximum relay contact rating?

The receiver contacts are rated up to 1A / 24V DC.

What is the operating temperature?

LIFE specifies an operating temperature range of -20°C to +55°C.

Does LIFE VISIO come as a pair?

Yes. LIFE specifies VISIO as one pair of synchronized outdoor photocells per pack, consisting of transmitter and receiver units.

Can LIFE VISIO be used with sliding gates?

Yes. It can be integrated with compatible sliding gate control systems that support photocell safety inputs.

Can LIFE VISIO be used with swing gates?

Yes. LIFE VISIO is suitable for compatible automatic swing gate systems.

Can LIFE VISIO work with parking barriers?

Yes. It can be used with compatible automatic parking barriers as a vehicle and obstacle detection safety device.

Can LIFE VISIO be used outdoors?

Yes. LIFE specifies VISIO as a pair of synchronized photocells designed for outdoor use.

Do you provide LIFE VISIO installation in UAE?

Yes. Professional photocell installation, replacement, alignment and technical support are available in Dubai, Sharjah and other UAE locations.

Do you deliver LIFE VISIO across UAE?

Yes. UAE-wide delivery is available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Buy Original LIFE VISIO Photocell Sensor in UAE

Order the original LIFE VISIO 20M Photocell Sensor in UAE for compatible automatic sliding gates, swing gates, garage doors, shutters and parking barriers. With synchronized outdoor operation, 12–24V DC power, IP54 protection and NC/NO relay contacts, VISIO provides professional obstacle detection for automatic entrance systems.

Original LIFE Italy Product | UAE-Wide Delivery | Professional Installation Available | Technical Support